Chapter 2 - Installing the Yamaha CRW2216E Drive

3.Your hands or body may be holding a charge of static elec- tricity.

Touch a metallic portion of the chassis or power supply to release any such charge.

4.Remove the front cover of a vacant half-height drive bay.

For details refer to the manual of your computer.

5.Slide the CRW2216E drive into the drive bay from the front.

At this time, be careful not to apply excessive force to the drive itself. Finger-tighten the four fastening screws, and check that there is enough room to connect the power supply cable, IDE interface connector, and AUDIO cables.

VOL

ON/

READ/

DISC

 

WRITE

8