162 CVP-202
■ Connecting the computer’s USB port to the Clavinova via
a USB interface, such as the UX256, UX96, or UX16..................
Connect the computer’s USB port to the USB interface (such as the UX256,
UX96, or UX16) using a USB cable. Install the driver (that came with the USB
interface) on the computer, and connect the USB interface to the Clavinova using
a serial cable or MIDI cables.
For more information, refer to the instruction manual for the USB interface.
160
●Clavinova [HOST SELECT] switch setting
Set the Clavinova [HOST SELECT] switch properly according to the type of
connected computer.
• Macintosh: “Mac” (data transfer rate: 31,250bps, 1MHz clock)
• Windows: “PC-2” (data transfer rate: 38,400bps)
If your system does not work
properly with the connections
and settings listed above, your
software may require different
settings. Check your software
operation manual and set the
[HOST SELECT] switch to the
proper data transfer rate.
●An example of connecting the USB interface to the Clavinova
using a serial cable
●An example of connecting the USB interface to the Clavinova
using MIDI cables
USB interface
Clavinova
or
Standard Machintosh 8-pin system
peripheral cable
USB cable
USB USB
HOST SELECT
PC-1
TO HOST
Mac
computer
computer
USB interface
Clavinova
MIDI cablesUSB cable
USB USB
HOST SELECT
MIDI
OUTIN
MIDI
Data Connections