Making Global and Other Important Settings — Function
CVP-209/207
148
The explanations here apply to step #3 of the procedure on page 133.

Making Settings for Fade In/Out, Metronome, Parameter Lock, and

Tap CONFIG 1

Fade In Time, Fade Out Time, Fade Out Hold Time

These determine how long it takes for the accompaniment style and song to fade in or fade out.

Metronome

These let you make settings for the metronome-related parameters.
Other Settings — Utility
12345678
Determines the time it takes for the
volume to fade in, or go from minimum to
maximum (range of 0 - 20.0 seconds).
Determines the time it takes for the volume to
fade out, or go from maximum to minimum
(range of 0 - 20.0 seconds).
Determines the time the volume is held
at 0 following the fade out (range of 0 -
5.0 seconds).
12345678
Determines the level of the
metronome sound.
Determines which sound is used for the metronome.
Bell Off........................ Conventional metronome sound, with no bell.
Bell On.........................Conventional metronome sound, with bell.
English Voice..............Count in English (One, Two, Three, Four)
German Voice..............Count in German (Eins, Zwei, Drei, Vier)
Japanese Voice...........Count in Japanese (Ichi, Ni, San, Shi)
French Voice...............Count in French (Un, Deux, Trois, Quatre)
Spanish Voice.............Count in Spanish (Uno, Dos, Tres, Cuatro)
Determines the time
signature of the metronome
sound.
When you start the song or
accompaniment style, the
values matching to them are
automatically set.