Making Global and Other Important Settings — Function
151
CVP-209/207
Entering Your Name and Language Preference — OwnerRestoring the Factory-programmed Settings of the CVP-209/207 — System Reset

This operation lets you restore the CVP-209/207 to its original factory settings. These settings include System Setup,

MIDI Setup, User Effect, Music Finder, and Files & Folders.

F
J
I
12345678
H
G
Press this button to
enter an Owner
name(page 17; for
instructions on
naming see
page 46). This name
is automatically
shown when you
turn the power on.
Determines the
language used
for the display
messages.
Once you
change this
setting, all
messages will
be shown in the
selected
language.
Calls up the MAIN PICTURE
display, from which you can
select the background of the
MAIN display.
When selecting background data from
a floppy disk:
•Only bitmap files (.BMP) can be
used for the background of the
MAIN display. Make sure to use
images no larger than 640 x 480
pixels. Smaller images are auto-
matically copied and tiled in the dis-
play.
•The selected background will not
be displayed when the power is
turned on again unless the same
disk containing the data has been
inserted into the drive.
•The background may take some
time to appear. If you want to
reduce this time, save the back-
ground to the USER page of the
MAIN PICTURE display.
n
When “JAPANESE” is selected for the
Language parameter, and you change
this to one of the western languages,
the kanji and kana characters of the
file name stored in the disk drive are
changed to western characters
(page 41).
A
E
D
C
B
F
J
I
12345678
H
G
These call up the corresponding Open/
Save displays. These let you store the
corresponding data as files to disk, for
future recall. Pressing each of these
buttons calls up the corresponding
Open/Save display, from which you can
select the corresponding PRESET
page. From this PRESET page, you
can save the relevant data.
Restores the System Setup parameters to the
original factory settings. You can also restore
only the System Setup settings by
simultaneously holding down the highest key
on the keyboard (C7) and turning on the power.
Restores the MIDI
templates to the original
factory settings.
Restores the User Effects
(page 124) to the original
factory settings.
Restores the Music Finder
data to the original factory
settings.
Deletes all files and folders
stored in the User page.
Executes the Factory Reset operation
for all items checkmarked above.
The functions and settings
below do not apply to the Fac-
tory Reset operation. However,
you can restore these to their
original settings by calling up
the preset System Setup files,
using the Open/Save System
Files function.
Language
Owner Name
LDC Contrast
LCD Brightness

Video Out settings (NTSC/PAL)

Screen Content
All Music Finder records can be
stored together as a single file.
When calling up a stored file, a
message appears prompting
you to replace or append the
records as desired.
Replace:
All Music Finder records cur-
rently in the instrument are
deleted and replaced with the
records of the selected file.
Append:
The records called up are
added to the vacant record
numbers.