Display Settings
CVP-409/407 Owner’s Manual
20
Introduction
After selecting, press the [DIRECT ACCESS] button then press the [EXIT] button to
return to the Main display. The newly selected picture is shown as the background
of the Main display.
Entering the Owner Name in the Opening Display
You can have your name appear in the opening display (the display that first
appears when the power is turned on).
1Call up the operation display.
[FUNCTION] [J] UTILITY TAB[
][
®
] OWNER
2
Press the [I] (OWNER NAME) button and call up the Owner Name display.
Refer to page 73 for character-entry details.
The explanation about picture
compatibility at right applies
also to the background of the
Song Lyrics display.
Importing a favorite picture for the Main display background
Even though a variety of pictures are available on the Preset drive, you can
load your own favorite picture data from USB storage device (USB flash
memory/floppy disk, etc) to the instrument for use as background.
Make sure to use images no larger than 640 x 480 pixels.
If you select a picture file on the USB storage device (USB flash memory/
floppy disk, etc), the background may take some time to appear. If you want
to reduce this time, save the background from the USB drive to the USER
drive of the Picture Selection display.
If you select a picture file on the USB drive, the selected background will
not be displayed when the power is turned on again unless the same media
containing the data has been inserted into the drive.
Displaying the version number
To check the version number of this instrument, press the [7
π†
]/[8
π†
]
(VERSION) buttons in the display in step 1 above. Press the [EXIT] button to
return to the original display.