Troubleshooting
165
CVP-900
The sound is distorted or noisy. The volume may be turned up too high. Make sure all relevant volume settings
are appropriate.
This may be caused by the effects. Try canceling all unnecessary effects,
especially distortion-type effects (page 123).
Some filter resonance settings in the Custom Voice Creator display (page 91)
can result in distorted sound. Adjust these settings if necessary.
Is the gain of the Low band set too high in the Master Equalizer display
(Mixing Console — page 125) ?
•A strange “flanging” or “doubling” sound
occurs. Also, the sound is slightly different
each time the keys are played.
Both the Main and Layer parts are set to “ON,” and both parts are set to play the
same voice. Set the Layer part to “OFF” (page 57) or change the voice for each
part (page 55).
Problem Possible Cause and Solution