7
Nomenclature
!2 Manual Button (MANUAL)
Independent of the selected patch’s settings, this
button changes the sound to the settings of the
knob’s current position.
The lamp will flash if the patch setting is changed.
Press the [MANUAL] and [UTILITY] buttons simul-
taneously to enter the External Control Setting Mode.
(→ page 21)
!3 Utility Button (UTILITY)
Enters the Utility Mode. (→ page 23) Press the
[UTILITY] and [STORE] buttons simultaneously to
enter the Tuner Mode. (→ page 22)
!4 Store Button (STORE)
Enters the Store Mode. (→ page 17)
!5 Compressor Button (COMP)
Switches the Compressor ON (lamp lit)/OFF (lamp
off).
!6 Compressor Knob (COMP)
Adjusts the depth of the compressor’s effect.
Turn to the right to increase the depth of the effect.
!7 Modulation Group Effect Buttons
(CHORUS/FLANGER/PHASER/ROTARY/
TREMOLO)
These buttons set the type of Modulation Effect to
be used. The selected effect’s lamp will light.
A secondary parameter for the effect can be set by
turning the SPEED or DEPTH knob while holding
the button of the currently selected effect.
!8 Speed Knob (SPEED)
Sets the Speed parameter and a secondary param-
eter of the Modulation Group’s Effects.
!9 Depth Knob (DEPTH)
Sets the Depth parameter and a secondary param-
eter of the Modulation Group’s Effects.
@0 Delay Group Effect Buttons
(DELAY/TAPE ECHO)
These buttons set the type of Delay Effect to be
used. The selected effect’s lamp will light.
@1 Time Knob (TIME)
Sets the Delay time.
@2 Feedback Knob (FEEDBACK)
Sets how many times the delay will repeat.
@3 Level Knob (LEVEL)
Sets the Delay’s volume level.
@4 Reverb Group Effect Buttons
(SPRING/HALL/PLATE)
These buttons set the type of Reverb Effect to be
used. The selected effect’s lamp will light.
@5 Reverb Knob (REVERB)
Sets the amount of Reverb that is added to the
sound.