9
Nomenclature
#4
#6
#5
#7
●Top Panel ●Rear Panel
#4 Foot Switches 1, 2, 3
According to the settings in the Utility Mode (→ page
23), the switches can be used as for the following
functions.
• Selects a patch (1/2/3) from the currently selected bank.
• Switches the effect blocks ON/OFF (1: Modulation Block, 2:
Delay Block, 3: Reverb)
#5 Bank Switch (TAP/BANK/TUNER)
•Tap the switch: Sets the Delay Time according
to the tempo at which the switch is tapped. (→
page 20)
•Press the switch until the Foot Switches 1-3
and Bank Switch lamps and the display on
the main unit flashes.: Use the foot switches
1-3 to change the Area/Group/Bank. (→ page
16)
•Hold the switch until “tu” appears in the dis-
play. (The Foot Switch 1-3 and Bank Switch
lamps all go off.) : Enters the Tuner Mode. (→
page 22)
#6 EXP Pedal Jack (EXP. PEDAL)
Connect a foot controller (expression pedal) (op-
tional) such as the YAMAHA FC-7, etc. to this jack,
and control DG60FX-112 parameters or use the de-
vice as a wah pedal. (→ pages 21, 25)
■Foot Switch Unit#7 Unit Terminal
Use the supplied special cable to connect the
Foot Switch Unit to the FOOT SW jack #0 on the
rear panel of the main unit. (→ page 10)