Yamaha Digital Mixing Engine, DME32 25-pin Dsub Male Connector

1 12

5. Creating Split AES Cables

The MY8-AE Card is capable of 8 AES/EBU inputs and outputs via a 25-pin Female D-sub

connector. In order to use this card with a DME32 and AD824/DA824 configuration, a split

AES/EBU cable must be created. You must use shielded 110-ohm twisted-pair AES cable and

25-pin Male D-sub connector on each end.

Up to 200 meters

D-sub 1

D-sub 2

D-sub 3

INPUT

DME32

OUTPUT

25-pin Dsub Male Connector

25-pin Male D-sub (Front View)

Split AES/EBU Cable

Contents

Main 1. Available I/O Options SLOT 1 SLOT 2 SLOT 4 SLOT 3 Page 2. Analog Line Level Only Slot Component 3. Digital I/O 4. Using the AD824 and DA824 Page 25-pin Dsub Male Connector 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 Signal Description Twisted Pairs 6. AD824 Connection for Remote Control 9-pin Dsub Female Connector 9-Pin Female Dsub Connector (Front View) RS-422 Serial Cable - Up to 200 Meters in Length