83
5Start recording.
When the “RECORD“ indication stops flashing and the beat bars and track
number start flashing, you can start recording simply by playing the key-
board (or by pressing the START/STOP button).
Recording to the Chord Track
A special Chord track is provided for recording pattern data. This is
automatically recorded to the Chord track (track 6). To select the
Chord track and turn on the Pattern Control, press the PATTERN
CONTROL button.
You can also simultaneously record one of the melody tracks (1 - 5)
and the Chord track (6).
SONG RECORDING
If Pattern Control has
already been turned on
before entering the Record
mode, the Chord track is
automatically selected.
If you want to rehearse your part before recording, press the SYNC-START
button to turn Sync-Start off. After rehearsing, press SYNC-START again to
return to the above condition.
If you wish to cancel recording at this point, press the RECORD button
again.
This function can also be
controlled by using a
connected footswitch. (See
page 21.)
004
RECORD
SONG
User11
Indicates Record
standby.
Flashing beat bars
indicate Sync-Start is on.
When recording the Chord track
With Sync-Start on, play the first chord of the song in the Pattern
section of the keyboard. The pattern starts automatically and you
can continue recording, playing other chords in time with the pat-
tern.
6Stop recording.
After you’ve finished playing the part, press the START/STOP button.
Pattern Section Performance Section

001 142

MEASURE
1CHORD