Yamaha DM 1000 12 , Output Channels

12 Chapter 2—Console Window

Studio Manager for DM1000—Owner’s Manual

Output Channels

When the Master Layer is selected, the Bus Out and Aux Send channels are displayed. A Bus

Out channel is shown here. Aux Send channels appear the same except that they do not have

a STEREO button.

A STEREO button (Bus Out only)

This button is used to route the Bus Out to the Stereo Out.

B INSERT button

This button is used to turn on and off the Bus Out’s Insert.

C COMP button

This button is used to turn on and off the Bus Out’s Compressor.

D Compressor curve

This display shows the Compressor’s curve.

E EQ button

This button is used to turn on and off the Bus Out’s EQ.

F EQ curve

This display shows the Equalizer’s curve, which can be set by

dragging.

G DELAY button

This button is used to turn on and off the Bus Out’s Delay func-

tion.

H Delay parameter

This parameter is used to set the delay time of the Delay func-

tion. Delay times can be set by dragging.

I Channel number

This is the channel number.

J AUTO button

This button displays the Automix status of the Bus Out.

K SELECT button

This button is used to select the Bus Out.

L SOLO button

This button solos the Bus Out. It appears orange while the Bus

Out is soloed.

M ON button

This button turns the Bus Out on and off. It appears orange

while the Bus Out is on.

N Short channel name

This is the channel’s short name. To edit the name, click it and

type.

O Channel fader

This is the Bus Out’s fader.

P Channel meter

This meter displays the signal level of the Bus Out.