6Select the time zone if the DVD Recorder is tuned to the PBS channel of a different time zone than yours.
7Confirm each entry with ENTER/OK.
8To end, press SYSTEM MENU repeatedly to remove the menus.
➤The time and date will be set by the specified channel the next time you switch to Standby power mode.
➤The DVD Recorder downloads from the specified channel, if possible. If the specified channel does not carry date and time information, the message appears ‘Clock not set.’
The Automatic Time and Date screen will reappear automatically.You can repeat the procedure with a new channel number.
Time/Date Manually
If the time in the DVD Recorder display is not correct, the clock must be set manually.
Time/date
Manual |
|
|
|
Time | 03:46 |
AM/PM | PM |
Year | 2001 |
Month | 06 |
Date | 16 |
Daylight Saving | On |
To exit press
SYSTEM MENU
1In the installation menu, select Time/Date with w/v (down/up cursor), then press u (right cursor).
➤The Automatic/Manual screen is displayed, with the cursor on the currently selected option.
2Press the w (down cursor) to select ‘Manual.’
3Press ENTER/OK.
➤The Time/Date screen appears.
4Adjust ‘Time,’ ‘AM/PM,’ ‘Year,’ ‘Month,’ ‘Date,’ and ‘Day- light saving’ if required. Select w/v (down/up cursor). Change values with t/u (left/right cursor) or the
5When the information is all correct, press ENTER/ OK.
6Press SYSTEM MENU repeatedly to remove all menus.
Cable/Antenna
The Cable/Antenna option allows you to overrule the Auto Cable Defect feature in case misdetection took place.
1In the Installation menu, select ‘Cable/Antenna’ with w/v (down/up cursor), then press ENTER/OK or u (right cursor).
➤ The Cable/Antenna’ screen is displayed.
2Select ‘Cable’ or ‘Anten.’ using t/u (left/right cursor). Factory setting is ‘Auto.’
3Press ENTER/OK to store the setting.
4 Press SYSTEM MENU to exit the Cable/Antenna | English |
➤ If you have selected ‘Cable’ or ‘Anten.,’ the Auto | |
menu. |
|
Channel Search starts. Only after a new channel |
|
search, the new setting will take effect. |
|
Installation |
|
Cable/Anenna |
|
To start auto channel |
|
search - press OK |
|
To exit press
SYSTEM MENU
5Press ENTER/OK to confirm. If you press SYSTEM
MENU, you will return to the Installation menu. When Auto Channel Search is complete, press SYSTEM MENU repeatedly to remove all menus.
OPERATION 23