Setup Menu

To input your favorite tracks/chapter

3Use the numeric keypad (0-9) to enter a valid track/chapter number.

4Use 1 234 to move the cursor to the next position.

➜If the track number is more than ten, press T to open the next page and proceed with programming or,

➜Use 1 234 to highlight {NEXT} on the program menu, then press ENTER/ OK.

5Repeat steps 3–4to input another track/ chapter number.

If you want to remove a track

6Use 1 234 to move the cursor to the track you want to remove.

7Press ENTER/OK to remove this track from the program menu.

Note:

– On SA-CD discs, you can program tracks on the CD layer.

Program: Disc

You can play the disc in the order you want by programming the discs to be played. Up to 5 discs can be stored.

1In ‘GENERAL SETUP PAGE’, press 34 to highlight {PROGRAM}, then press 2 to select {FDS}.

2Press ENTER/OK to confirm.

(1)Disc : _

(2)Disc : _

(3)Disc : _

(4)Disc : _

(5)Disc : _

To input your favorite discs

3Use the numeric keypad (0-9) to enter a valid disc number.

4Use 1 234 to move the cursor to the next position.

5Repeat steps 3–4to input another disc number.

If you want to remove a disc

6Use 1 234 to move the cursor to the disc you want to remove.

7Use the numeric keypad (0-9), press 0 to remove this disc from the program menu.

To start program playback

•Use 1 234 to highlight {START} on the program menu, then press ENTER/ OK.

➜Playback will start with the selected tracks or discs under the programmed sequence.

To exit program playback

•Use 1 234 to highlight {EXIT} on the program menu, then press ENTER/ OK.

TIPS: To return to the previous menu, press 1. To remove the menu, press SETUP.

22