PRECAUTIONS

Before using this unit please read these operating instructions carefully. Take special care to follow the warnings indicated on the unit itself as well as the safety suggestions listed below.

Afterwards keep them handy for future reference.

Getting started

Safety

1.Power Source—The unit should be connected to a power

supply only of the type described in the operating instructions or as marked on the unit. If you are not sure of the type of power supply to your home, consult your appliance dealer or local pow-

er company.

2.Polarization—If the unit is equipped with a polarized AC power plug (a plug having one blade wider than the other), that plug will fit into the AC outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

3.Power Cord Protection—AC power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Never take hold of the plug or cord if your hand is wet, and always grasp the plug body when connecting or disconnecting it.

4.Overloading—Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

5.Nonuse Periods—When the unit is not being used, turn the power off. When left unused for a long time, the unit should be unplugged from the household AC outlet.

6.Attachments—Do not use attachments not recommended by the unit manufacturer as they may cause hazards.

Placement

1.Ventilation—The unit should be situated so that its location or position does not interfere with its proper ventilation. Allow 10 cm (4q) clearance from the rear of the unit.

2.Foreign Material—Care should be taken so that objects do not fall into and liquids are not spilled into the unit. Do not subject this unit to excessive smoke, dust, mechanical vibration, or shock.

3.Carts and Stands—The unit should be used only with a cart or stand that is recommended by

the manufacturer. The unit and cart combination should be moved with care. Quick stops, exces-

siveforce,anduneven surfaces may cause the unit and cart combination to overturn.

4.Mounting—Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting acces- sory recommended by the manufacturer.

Maintenance

Disconnect this unit from the AC outlet before cleaning.

Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild detergent solution.

Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

Installation

Environment

1.Water and Moisture—Do not use this unit near water—for example, near a bathtub, washbowl, swimming pool, or the like. Damp basements should also be avoided.

2.Condensation—Moisture may form on the lens in the following conditions…

³immediately after a heater has been turned on. ³in a steamy or very humid room.

³when the unit is suddenly moved from a cold environment to a warm one.

If moisture forms inside this unit, it may not operate properly. To correct this problem, turn on the power and wait about one hour for the moisture to evaporate.

3.Heat—The unit should be situated away from heat sources such as radiators and the like. It also should not be placed in tempera- tures less than 5 oC (41 oF) or greater than 35 oC (95 oF).

Do not place the unit

The model number and serial number of this product can be

on amplifiers or equip-

found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for

ment that may become

future reference.

 

hot.

MODEL NUMBERDVD-S1200
The heat can damage the unit.

 

SERIAL NUMBER

 

4