![](/images/new-backgrounds/1247679/24767957x1.webp)
Setup Menu
Audio setup menu
1Press SET UP.
2Press 2 / 3 to select “AUDIO SETUP PAGE”.
3Press ENTER.
AUDIO SETUP PAGE
ANALOG OUTPUT
DIGITAL AUDIO
HDMI AUDIO
NIGHT MODE
LIP SYNC
Setting the digital output
The [DIGITAL AUDIO] options are: [DIGITAL OUTPUT] and [LPCM OUTPUT].
1In “AUDIO SETUP PAGE”, press 5/a to highlight [DIGITAL AUDIO], and then press 3.
2Press 5/a to highlight an option.
3Press 3 to open a submenu.
DIGITAL OUTPUT
Set the digital output according to your optional audio component connections.
OFF
English
Setting the analog output
Set the analog output to match the playback capability of this unit.
1In “AUDIO SETUP PAGE”, press 5/a to highlight [ANALOG OUTPUT], and then press 3.
STEREO
Select this to change channel output to stereo, which only delivers sound from the two front speakers.
LT/RT
Select this if this unit is connected to a Dolby Pro Logic decoder.
2Press 5/a to select a setting, and then press ENTER.
Select this to turn off the digital output.
ALL
Select this if you have connected the digital audio output jack to a
MPEG ➜ PCM
Select this if your receiver is not capable of decoding MPEG audio signals.
PCM ONLY
Select this only if your receiver is not capable of decoding
LPCM OUTPUT
Select this if you have connected this unit to a
Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.
25En