their model at distances farther than a football field (300+ feet). At greater distances, you could lose sight of your model and you may also exceed the radio system’s operating range which will cause the fail-safe system to activate. For best visibility and control of your model keep your model within 200 feet, regardless of the maximum range available.

No matter how fast or far you drive your model, always leave adequate space between you, the model, and others. Never drive directly toward yourself or others.

TRANSMITTER LED CODES

LED Color / Pattern

Name

Notes

 

 

 

TRAXXAS TQ 2.4GHZ RADIO SYSTEM

TQ 2.4GHz Binding Instructions

For proper operation, the transmitter and receiver must be electronically ‘bound.’ This has been done for you at the factory. Should you ever need to re-bind the system or bind to an additional transmitter or receiver, follow these instructions. Note: the receiver must be connected to a 4.8-6.0v (nominal) power source for binding and the transmitter and receiver must be within 5 feet of each other.

1. Press and hold the SET button on the transmitter.

2. Turn on the transmitter and release the SET button. The status LED will

flash red slowly, indicating that the transmitter is in bind mode.

3. Press and hold the LINK button on the receiver.

4. Turn on the speed control by pressing the EZ-Set button and release

To prevent loss of radio range, do not kink or cut the black wire, do not bend or cut the metal tip, and do not bend or cut the white wire at the end of the metal tip.

Solid green

Slow red

(0.5 sec on / 0.5 sec off)

Normal Driving Mode

Binding

See page 13 for information on how to use the transmitter controls.

See this page for more information on binding.

the LINK button.

5. When the LEDs on both the transmitter and the receiver turn solid

green, the system is bound and ready for use. Confirm that the

steering and throttle operate properly before driving your model.

Correct No No No No

Flashing medium red (0.25 sec on / 0.25 sec off)

Flashing fast red

(0.125 sec on / 0.125 sec off)

Low Battery Alarm

Link Failure / Error

Put new batteries in the transmitter. See page 11 for more information.

Transmitter and receiver are no longer bound. Turn the system off and then back on to resume normal operation. Find source of the link failure (i.e., out of range, low batteries, damaged antenna).

SETTING UP THE ANTENNA

The receiver antenna and antenna tube must be properly installed before operating your model. Follow these steps to install the antenna and antenna tube:

1. Slide the antenna wire into the antenna

tube to its full extent. When fully inserted,

the wire should reach to approximately 1/2

Antenna

Tip

Antenna

Tube

Fail-Safe

Your Traxxas radio system is equipped with a built- in fail-safe function that returns the throttle to its last saved neutral position in the event of a signal loss. The LED on the transmitter and the receiver will rapidly flash red when the fail- safe mode is activated. If

RECEIVER LED CODES

LED Color / Pattern

Name

Notes

 

 

 

inch below the tube cap. Do not leave any

slack in the antenna wire.

2. Insert the base of the antenna tube into the

fail-safe activates while you are operating your model, determine the reason for

Solid green

Slow red

(0.5 sec on / 0.5 sec off)

Flashing fast red

(0.125 sec on / 0.125 sec off)

Normal Driving Mode

Binding

Fail-Safe / Low- Voltage Detect

See page 13 for information on how to use your transmitter controls.

See this page for more information on binding.

Consistent low voltage in the receiver triggers Fail Safe so that there is enough power to center the throttle servo before it completely loses power.

antenna post. Take care not to crimp the

antenna wire.

3. Slide the crimp nut over the antenna tube

and screw it onto the antenna post.

4. Use the supplied tool to tighten the crimp

nut on the post just until the antenna tube

is securely in place. Do not overtighten

or crush the antenna wire against the

chassis. Do not bend or kink the antenna

wire! Do not shorten the antenna tube.

See the sidebar for more information.

Antenna

Wrench

Antenna

Crimp Nut

Antenna

Post

signal loss and resolve the problem before operating your model again.

3

RAPTOR • 15

Page 14 Page 16
Page 15
Image 15
Ford 58064 Setting UP the Antenna, TQ 2.4GHz Binding Instructions, Antenna wire, Screw it onto the antenna post, Fail-Safe
Page 14 Page 16

58064 specifications

The Ford 58064 is a standout model that showcases a perfect blend of performance, technology, and utility. Designed primarily for the construction and heavy equipment sector, this versatile machine has garnered attention for its robust capabilities and innovative features.

One of the main highlights of the Ford 58064 is its powerful engine. Equipped with a high-performance diesel engine, the 58064 offers enhanced horsepower and torque, allowing it to tackle a variety of demanding tasks. This engine is engineered for efficiency, providing reliable power while optimizing fuel consumption, which is a critical consideration for any business operating heavy machinery.

In terms of design, the Ford 58064 boasts a rugged and durable construction, making it well-suited for challenging working environments. The chassis is built to withstand heavy loads and harsh conditions, ensuring longevity and reduced maintenance costs. The hydraulic system of the 58064 is another noteworthy feature. It provides excellent lifting and digging capabilities, enabling operators to complete tasks with precision and speed. The system is designed to ensure smooth operation and response, which is crucial in a fast-paced work setting.

Technologically, the Ford 58064 is equipped with advanced features that enhance usability and safety. A user-friendly control interface simplifies operation, allowing even less experienced operators to navigate the machine efficiently. Additionally, the model includes safety features such as a rollover protection system and advanced braking mechanisms that enhance operator safety on job sites.

The cab of the Ford 58064 is designed with operator comfort in mind. It offers ample space, ergonomic seating, and excellent visibility, reducing fatigue during long working hours. Enhanced climate control and sound insulation also contribute to a more pleasant working environment.

Moreover, the Ford 58064 is compatible with a variety of attachments, increasing its versatility. From backhoes to loaders and excavators, operators can customize their machine to suit specific job requirements, making it an invaluable asset to any fleet.

In conclusion, the Ford 58064 stands out in the heavy machinery market due to its powerful performance, durable design, advanced technology, and operator-friendly features. It is a reliable choice for those seeking a machine that can deliver exceptional results across various applications, making it a preferred option for contractors and construction companies alike.
Top Page Image Contents