INSTALLING TRANSMITTER BATTERIES

Your TQ 2.4GHz transmitter uses 4 AA batteries. The battery compartment is located in the base of the transmitter.

1.Remove the battery compartment door by pressing the tab and lifting the door up.

2.Install the batteries in the correct orientation, as indicated in the battery compartment.

3.Reinstall the battery compartment door and snap it closed.

4.Turn on the transmitter and check the status LED for a solid green light.

If the status LED flashes red, the transmitter batteries may be weak, discharged, or possibly installed incorrectly. Replace with new or freshly charged batteries. The status LED does not indicate the charge level of the battery pack installed in the model. Refer to the Troubleshooting section on page 15 for more information on the transmitter’s status LED codes.

TRAXXAS TQ 2.4GHZ RADIO SYSTEM

CHARGING THE BATTERY PACK

The included charger can be used to charge the included battery pack. The battery pack should be removed from the vehicle before charging. Do not leave the battery unattended while charging. It is normal for the battery to become slightly warm as it nears full-charge, but the battery should never become hot. If the battery becomes hot, disconnect it from the charger immediately.

1.Plug the charger into the wall. The LED on the charger should glow green.

2.Connect the included battery pack to the charger output cord. The LED will glow red, indicating the battery is charging.

3.The battery should charge for approximately 8 ½ hours. The LED will turn green when the battery is fully charged. Disconnect the battery from the charger after charging.

1

2

3

Using Other Chargers

Another convenient option for charging the included battery is an AC peak-detecting charger that plugs directly into an AC wall outlet, such as the TRX EZ-Peak™(Part #2930). It contains special peak-detection circuitry that automatically shuts the charger off when the battery is fully charged.

For faster charging, the included battery may be charged at

4 amps. The TRX EZ-Peak™is a 4 amp charger and will charge the included battery in about 45 minutes!

Caution: Never use a 15-minute timed charger to recharge your model’s battery packs. Overcharging may result, causing damage to the battery packs.

If the status LED doesn’t light green, check the polarity

of the batteries. Check rechargeable batteries for a full charge. If you see any other flashing signal from the LED, refer to the chart on page 15 to identify the code.

Use the Right Batteries

Your transmitter uses AA batteries. Use new alkaline batteries, or rechargeable batteries such as NiMH (nickel-metal hydride) batteries, in your transmitter. Make sure rechargeable batteries are fully

charged according to the manufacturer’s instructions.

If you use rechargeable batteries in your transmitter, be aware that when they begin

to lose their charge, they lose power more quickly than regular alkaline batteries.

Caution: Discontinue running your model at the first sign of weak batteries (flashing red light) to avoid losing control.

2,4

RAPTOR • 11

Page 10 Page 12
Page 11
Image 11
Ford 58064 owner manual Installing Transmitter Batteries, Charging the Battery Pack
Page 10 Page 12

58064 specifications

The Ford 58064 is a standout model that showcases a perfect blend of performance, technology, and utility. Designed primarily for the construction and heavy equipment sector, this versatile machine has garnered attention for its robust capabilities and innovative features.

One of the main highlights of the Ford 58064 is its powerful engine. Equipped with a high-performance diesel engine, the 58064 offers enhanced horsepower and torque, allowing it to tackle a variety of demanding tasks. This engine is engineered for efficiency, providing reliable power while optimizing fuel consumption, which is a critical consideration for any business operating heavy machinery.

In terms of design, the Ford 58064 boasts a rugged and durable construction, making it well-suited for challenging working environments. The chassis is built to withstand heavy loads and harsh conditions, ensuring longevity and reduced maintenance costs. The hydraulic system of the 58064 is another noteworthy feature. It provides excellent lifting and digging capabilities, enabling operators to complete tasks with precision and speed. The system is designed to ensure smooth operation and response, which is crucial in a fast-paced work setting.

Technologically, the Ford 58064 is equipped with advanced features that enhance usability and safety. A user-friendly control interface simplifies operation, allowing even less experienced operators to navigate the machine efficiently. Additionally, the model includes safety features such as a rollover protection system and advanced braking mechanisms that enhance operator safety on job sites.

The cab of the Ford 58064 is designed with operator comfort in mind. It offers ample space, ergonomic seating, and excellent visibility, reducing fatigue during long working hours. Enhanced climate control and sound insulation also contribute to a more pleasant working environment.

Moreover, the Ford 58064 is compatible with a variety of attachments, increasing its versatility. From backhoes to loaders and excavators, operators can customize their machine to suit specific job requirements, making it an invaluable asset to any fleet.

In conclusion, the Ford 58064 stands out in the heavy machinery market due to its powerful performance, durable design, advanced technology, and operator-friendly features. It is a reliable choice for those seeking a machine that can deliver exceptional results across various applications, making it a preferred option for contractors and construction companies alike.
Top Page Image Contents