TRAXXAS TQ 2.4GHZ RADIO SYSTEM
XL-5 Wiring Diagram
Your model is equipped with the Traxxas TQ 2.4GHz transmitter. The transmitter has two channels: Channel one operates the steering, and channel two operates the throttle. The receiver inside the model has three output channels. Your model is equipped with one servo and an electronic speed control.
TRANSMITTER AND RECEIVER
Steering Wheel
Red/Green Status LED
Set Button
Steering
Trim
Throttle
Trigger
MODEL WIRING DIAGRAM
Antenna | Motor | |
(Titan® 12T) | ||
| ||
Receiver |
|
Speed Control |
Channel 2 |
CH3 - Channel 3* | Traxxas | ||
CH2 | - Speed Control | ||
Connector (Male) | |||
CH1 | - Steering Servo | ||
to Battery | |||
CH1 | - Channel 1* | ||
| |||
*not used
Steering Servo
Channel 1
To Motor
Traxxas
Connector (Male)
to Battery
10 • RAPTOR
Heat Sinks
Power Switch |
| Battery Compartment |
|
LED | Set Button |
|
