Setup Menu
Note
This function is only available for NTSC video format and composite video /
Switching YUV/RGB
(Europe and Russia models only)
This setting allows you to toggle the output of the video signal between YUV (on VIDEO OUT - COMPONENT) and RGB (on SCART).
•Select [COMPONENT] in “VIDEO SETUP PAGE”.
YUV
Select this for the component video connection.
RGB
Select this for SCART connection.
Setting the HDMI video
When you connect this unit to an HDMI compatible component via the HDMI jack, select the following video output settings depending on the connected component.
1In “VIDEO SETUP PAGE”, press 5/a to highlight [HDMI SETUP], and then press
3.
2Press 5/a to highlight an option.
3Press 3 to enter a submenu.
WIDE SCREEN FORMAT
Set the aspect ratio of the projected images on the screen. This feature is only available when making HDMI connections and [TV DISPLAY] is set to [16:9] (see page 33) when playing back 4:3 image.
SUPERWIDE
Select to display a 4:3 image on the 16:9 screen with
4:3 PILLAR BOX
Select to display a 4:3 image on the 16:9 screen without stretching. When playing a disc recorded in the 16:9 image, the image is displayed in its original aspect ratio (16:9) without pillar boxes.
OFF
No aspect ratio adjustment is made when this option is selected.
Note
When the video signal is 480p or 576p, you cannot select [WIDE SCREEN FORMAT], and no aspect ratio adjustment is made even if [SUPERWIDE] or [4:3 PILLAR BOX] is selected.
HDMI VIDEO
Set the resolution depending on the monitor you are using. This unit is compatible with the following video formats:
480p/60Hz, 576p/50Hz, 720p/50Hz, 60Hz, 1080i/50Hz, 60Hz, and 1080p/50Hz, 60Hz
480P
480 progressive-scan video
576P
576 progressive-scan video
720P
720 progressive-scan video
1080I
1080 interlaced video
1080P
1080 progressive-scan video
AUTO
The resolution is automatically selected to match the monitor you are using.
36En