Yamaha DVD-S80 Connection, 1. VIDEO jack, 2. S VIDEO jack, 3. COMPONENT VIDEO OUT jacks, Video connection, Connecting the power cable

Connection

Video connection

This unit equips three types of video jacks as follows:

1. VIDEO jack

This jack transmits conventional composite video signal. Connect this jack to your AV amplifier so that you can switch the both audio and video inputs at once.

2. S VIDEO jack

This jack transmits color and luminance separately and achieves high quality color reproduction. Connect this jack to your television using a commercially available S-Video cable. If your AV amplifier equipped with S VIDEO input and output jacks, connect to the AV amplifier so that you can switch the both audio and video inputs at once.

Amplifier: e.g. AVR-S80

75Ω UNBAL.

VIDEO 1 IN

FM ANT GND AM ANT

OPTICAL	OPTICAL
DVD/CD	VIDEO 1

DVD/CD IN

DIGITAL AUDIO IN R L

3. COMPONENT VIDEO OUT jacks

These jacks transmit color difference and luminance separately and provide the best quality picture. Connect these jacks to the corresponding jacks of your television. If your AV amplifier equipped with COMPONENT VIDEO input and output jacks, connect to the AV amplifier so that you can switch the both audio and video inputs at once.

≥After making this connection, change the black level for a better picture (➡ page 16, Video—Black Level Control).

Note

Do not connect this unit to a television through a video cassette recorder. If you do so, the picture may not be played back properly due to the copyright protection technology incorporated in this unit.

Television

Video pin cable

		VCR OUT	MONITOR	SYSTEM	FRONT REAR	CENTER
			OUT	CONNECTOR
				MARK	L
					R
		VCR IN		TO SW–S80	6CH PREOUT	SUBWOOFER
VIDEO	R	L	VIDEO

Getting started

yellow

Audio/Video cable (included)

yellow

PCM/ DIGITAL	L	PB	Y
DTS	MIXED 2CH		S VIDEO
OPTICAL	R	PR
DIGITAL	SUBWOOFER	COMPONENT	VIDEO
		VIDEO OUT
AUDIO OUT	AUDIO OUT		VIDEO OUT

2

1

3

Connecting the power cable

To the household AC outlet

Power cable (included)

	The lead is polarized.
AC IN	Match the power cable’s
	connector to the unit’s inlet.

Plug the power cable into the AC IN when all connections are complete, and then plug this unit to the household AC outlet.

Caution

Do not use other AC power cables than the one provided. Otherwise it may result in causing fire or an electrical shock.

To enjoy 5.1-ch surround sound

≥Change the settings in “Digital output” to suit the equipment you connect (➡ page 17).

Note

You cannot use DTS Digital Surround decoders not suited to DVD.

RQT6573

5