3Hang the holes on the protruding screws.

60 mm

Make sure that the screws are securely caught by the narrow parts of the holes.

You can use the lower holes on the rear of the front/rear speakers.

60 mm

Cautions

Each speaker weighs 1.1 kg (2 lbs. 6 oz.). Do not mount them on thin plywood or a wall with soft surface material. If mounted, the screws may come out of the flimsy surface and the speakers may fall. This damages the speakers or causes personal injury.

Do not install the speakers to a wall with nails, adhesives, or any other unstable hardware. Long-term use and vibrations may cause them to fall.

To avoid accidents resulting from tripping over loose speaker cables, fix them to the wall.

Select a proper position on the wall to mount the speaker so that no one will injure his/her head or face.

SPEAKER SETUP

If you want to mount a speaker on a commercially available

speaker stand (for the front/rear speakers)

The screw holes (at an interval of 60 mm) on the bottom and the rear of the speaker can be used to mount the speaker on a speaker stand.

* Those screw holes can be used with M4 screws only.

60 mm

Front/rear speaker

(bottom)

60 mm

Front/rear speaker

(rear)

PREPARATION

English

13