Yamaha EM-203VCD Good, No good, SETTING UP THE SPEAKERS, Only for customers who use the YAMAHA NS-P30speaker system (separate purchase), 40mm, Notes, “NS-P30”

SETTING UP THE SPEAKERS

1

2

Wall/ wall supportTapping screw (Available at the hardware store)40mm

Good No good

Only for customers who use the YAMAHA NS-P30 speaker system (separate purchase)

If you use the YAMAHA NS-P30 speaker system with this unit, read the following descriptions for mounting the NS-P30.

*“NS-P30” is the package number which includes the YAMAHA speaker systems NX-E70 and NX-C70. NX-E70 is designed to be used as a rear effect speaker system, and NX-C70 is designed to be used as a center speaker system.

■Mounting the rear speakers (NX-E70)

Mount the rear speakers on a shelf, rack or on the floor directly, or hang them on the wall.

To mount the rear speakers on a wall

1 Attach the provided mounting bracket to the rear of the speaker by using the provided screws.

2 Fasten screws into a firm wall or wall support as shown in the diagram, and hang the holes of the mounting bracket on the protruding screws.

*The holes are arranged so that the speakers can be mounted in a side long, upright or upside-down way.

*Make sure that the screws are caught by a narrow part of the holes securely.Notes●Never attach the bracket to the speaker backwards.

●Speaker cords should be connected to the speaker’s terminals after the bracket is attached to the speaker to prevent the speaker cords pressed between the speaker and the bracket.

E-8