REMOTE CONTROL TRANSMITTER

Names of control buttons

(See figure 3 on page 5 at the beginning part of this manual.)
■Amplifier/tuner control buttons
1Remote Control Transmitter Window
2Preset Station Number Buttons
3A, B, C, D, E Selector Buttons
4TEST Button
5CENTER/REAR/DELAY Selector Button
6LEVEL Control Buttons
7SLEEP Button
8POWER Switch
9VOLUME – (Down)/+ (Up) Buttons
0DISPLAY Button
AMUSIC Button
BUSER Button
CPROGRAM Button
DFLAT Button
EINPUT Selector Buttons
FTUNER Input Selector Button
GPRESET Number (Down)/ (Up) Buttons
■CD player control buttons
HTrack Number Input Buttons
ITIME Button
JPROGRAM Button
KDisc Play MODE Selector Button
LDISC SKIP Button
MREPEAT Button
NSkip Buttons: /

(Search Buttons: / )

ORANDOM Button
PSTOP Button:
QPLAY/PAUSE Button:
R OPEN/CLOSE Button:

Loading the batteries for the remote control transmitter

(See figure 4 on page 5.)

1 Remove the battery compartment cover. (Slide the cover in the direction of the arrow.)

2 Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or equivalent) into the battery compartment.

* Installing the batteries improperly may cause failure.

3 Replace the battery compartment cover.

Precautions for battery use

•Insert the batteries according to the direction indicated in the battery compartment.

•Replace all batteries with new ones at the same time.

•Remove the batteries if they are weak or if the unit is not in use for long periods.

•Don’t mix normal batteries with rechargeable batteries.

Proper use of the remote control transmitter

(See figure 5 on page 5.)

Aim (within the range of 60° with no obstacles) the remote control transmitter at the remote control sensor and operate as shown.

Notes concerning use

•Replace the batteries if control distance decreases or operation becomes unstable.

•Periodically clean the transmitter window on the remote control transmitter and the sensor on the main unit with a soft cloth.

•Exposing the sensor on the main unit to strong light (especially an inverter type of fluorescent lamp etc.) may interfere with operation. In this case, reposition the main unit to avoid direct lighting.

•Keep the remote control transmitter away from moisture, excessive heat, shock and vibrations.

•The remote control transmitter’s usable range is within 0.2m (8”) and 6m (20’) away from the sensor.

E-6