HOW TO USE THE
English
|
|
|
| INPUT SELECTOR |
| VOLUME | |
|
|
|
|
|
|
| |
CD CHANGER RECEIVER |
|
|
|
|
|
|
|
|
|
| OPEN/ |
|
|
|
|
|
|
| CLOSE |
|
|
|
|
|
|
| DISC |
|
|
|
|
|
|
| CHANGE |
|
|
|
|
| DISC |
|
|
|
|
|
|
1 | 2 | 3 |
|
|
|
|
|
|
|
|
| RANDOM REPEAT | TIME | MEMORY | AUTO/MAN'L |
|
| PROGRAM |
|
|
|
|
|
|
|
|
| HOUR | MIN | TIME ADJ | TIMER |
POWER |
|
|
| PRESET/TUNING/BAND | A/B/C/D/E |
| |
|
|
| MUSIC |
|
|
|
|
|
| ECHO | ECHO |
|
|
| |
PHONES |
|
|
|
| MIC |
| MIC MIXING |
|
| USER | MEMORY | DISPLAY |
|
|
|
MIN MAX
3 | DISPLAY |
|
| CD |
|
|
1 | 2 | 3 | 4 | 5 |
1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | PRESET | |
6 | 7 | 8 | 9 | 0 |
A | B | C | D | E |
TIME | PROG |
|
| +I0 |
MODE | REPEAT | RANDOM | OPEN/CLOSE | TUNER |
DISC SKIP |
|
| STOP | PLAY/PAUSE |
|
|
| INPUT |
|
CENTER/REAR | TEST | FLAT |
|
|
/DELAY |
|
| ||
ECHO |
| MUSIC | PROGRAM | USER |
LEVEL | ||||
SLEEP |
| POWER |
| DISPLAY |
|
|
| ||
VOLUME
POWER
[“ON TIME” appears on the display, and soon it is changed to a time setting mode.]
Set to the time when you want to begin the timer play by using the HOUR button and the MIN button.
➃OFF TIME/time setting mode[“OFF TIME” appears on the display, and soon it is changed to a time setting mode.]
If necessary, set to the time when you want to finish the timer play (to turn this unit off) by using the HOUR button and the MIN button. Even if you do not set the time, it has already been set so that the timer play finishes after 1 hour.
Note
The TIMER button functions also in the time (ON TIME or OFF TIME) setting mode. (However, it also turns off the power.)
3 If you will not use this unit until the timer play begins, turn the power off by pressing the POWER switch or the TIMER button.
Note
If a timer play setting is made and the power is not turned off, the source set for the timer play will begin playing when the time comes in place of the source played at that time.
To cancel the timer play settingAfter the timer play is finished, press the DISPLAY button to call the current time. While the current time is displayed, press the TIMER button so that “TIMER” goes out from the display.
If it is not canceled, this unit will be turned on at the same time every day, so it can be used as an alarm. However, if you are planning to go out at that time, cancel the timer play setting.
*Unless the AC supply lead is unplugged or there is a power failure for more than 5 minutes, the time set on the timer will be retained until it is reset.
How to make time setting in the ON TIME or OFF TIME modeFor the hour:Press the HOUR button to change the hour to a higher value. Press and hold to change continuously.
For the minute:Use the MIN button and operate it in the same way as you did to change the hour.