10 EMX5014C Owner’s Manual
Quick GuideMixer Basics
You can use the reverb effect to simulate the sound of a concert hall or jazz club.
1Turn the PROGRAM dial to select the desired effect type.
To select a reverb effect, turn the dial to any value from 1 to 7.
2To turn on the effector, set the EFFECT ON
switch to its ON position ( ).
The switch lights up when turned on. As an alternative to the ONswitch, you can use a separately sold FC5 foot switch to toggle theeffector on and off.
3Set the EFFECT RTN fader to the “0” position.
4Use the channel EFFECT knobs to adjust the
effect depth for each channel.
5Use the EFFECT RTN fader to adjust the overall
effect depth.
Note that you can use the PARAMETER knob to adjust the charac-teristic sound of the selected effect. If you have selected a reverbeffect, the knob adjusts the reverb time.
1REVERB HALL 1 55
55 REVERB STAGE 1 9KARAOKE ECHO CC
CC FLANGER
2REVERB HALL 2 66
66 REVERB STAGE 2 0VOCAL ECHO DD
DD PHASER
3REVERB ROOM 1 77
77 REVERB PLATE ACHORUS 1 EE
EE AUTO WAH
4REVERB ROOM 2 88
88 DRUM AMBIENCE BCHORUS 2 FF
FF DISTORTION

Adding Some Reverb

3,5

1

42