8EMX5014C Owner’s Manual
Quick Guide
Mixer Basics
2Turn the Channel faders and the ST Master fader all
the way down.
3Set the POWER AMP switch to its upper position (to
L-R).
For information about this switch, see page 25.
4If you have connected input devices to channels 1
to 6, set the [26dB] switch ON ( ) or OFF ( ) on
each channel accordingly.
If you have connected a line-level device, such as a keyboard or
audio device, set the channel’s switch to the ON ( ). If you have
connected a microphone or other mic-level device, set the switch to
the OFF ( ).
5If you are using one or more condenser micro-
phones for your inputs, set the PHANTOM switch to
the ON position ( ).
2
2
3
5
8,10
2,10
4
9,11
2
3
5
6
7
7
8
• Be sure to leave this switch off if you do not need phantom power.
•When using phantom power, do not connect any devices other than
condenser microphones to the XLR input jacks. Other devices may be
damaged if connected to phantom power. This precaution does not
apply to balanced dynamic microphones, however, as these will not be
affected by phantom power.
•To protect your speakers and ears: Before turning the PHANTOM
switch ON or OFF, be sure to turn off the power to the mixer and to all
other devices having internal amplifiers. We also recommend that you
turn all output controls (Channel faders, ST Master fader, etc.) to mini-
mum settings before operating the switch, to avoid risk of loud noises
that could cause hearing loss or device damage.