Front & Rear Panels
EMX5014C Owner’s Manual 23
Reference
MEFFECT ON Switch/Indicator
Switches use of the internal effect on or off. The inter-
nal effect is applied only if this switch is turned on. To
set the switch on, press it in so that it lights up.
As an alternative to the ON switch, you can use a sepa-
rately sold FC5 foot switch to toggle the effector on
and off.
The internal effector is automatically turned on
whenever you switch on the mixer’s power.
NPFL (Pre-Fader Listen) Switch
Set this switch on to feed the signal from the internal
digital effect signal (pre the EFFECT RTN fader) into
the PFL bus, so that it can be monitored at the
PHONES jack.
•The signal will not feed into the PFL bus if the
effect’s ON switch is turned off.
•The PFL (G, N, d) and AFL e switches select
the mix to be monitored at the PHONES jack. If
the channel’s PFL or AFL switch is ON, the chan-
nel’s output is mixed into the monitor signal to the
PHONES jack. If both switches are OFF, the chan-
nel output is not fed to the PHONES jack.
OEFFECT RTN Fader
Adjusts the level of the effected sound into the Stereo
bus.
NOTE
NOTE