Quick Guide
BASIC
EMX512SC/EMX312SC/EMX212S 9
4If you have connected input devices to channels 1 to 4, set
the LINE/MIC switch on each channel accordingly.
If you have connected a line-level device, such as a keyboard or audio device,
set the channel’s switch to the LINE position ( ). If you have connected a
microphone or other mic-level device, set the switch to the MIC position ( ).
5If you are using one or more condenser microphones for
your inputs, set the PHANTOM switch to the ON position
().
6Turn on the power.
First turn on the power to all connected devices other than powered speakers
and amp, and then turn on the EMX itself. If using powered speakers or amps,
turn these on last.
• Be sure to leave this switch
off if you do not need phan-
tom power.
• When using phantom power,
do not connect any devices
other than condenser micro-
phones to the XLR input
jacks. Other devices may be
damaged if connected to
phantom power. This precau-
tion does not apply to bal-
anced dynamic microphones,
however, as these will not be
affected by phantom power.
• Before turning the PHAN-
TOM switch ON or OFF, be
sure to turn off the power to
the mixer and to all other
devices having internal
amplifiers. It is also recom-
mended that you set both
MASTER knobs to their “0”
position. Neglect of these
precautions may result in
damage to speakers, to other
equipment, or to your ears.