8
Front & Rear Panels
EMX620—Owner’s Manual
N
LIMITER indicator
The LIMITER indicator lights up when the lim-
iter circuit, which is designed to protect the inter-
nal power amplifier against excessive input
signals and load mismatches, activates.
If the LIMITER indicator lights up, back off the
MAIN MASTER level control, or the appropriate
channel LEVEL control a little. If the indicator
remains lit, make sure that the impedance of the
connected speaker system is correct.
■
MONI Section
The MONI section is used to set the MONI
MASTER level and MONI EFFECT RTN level.
O
EFFECT RTN
The MONI EFFECT RTN control determines the
level of the signal from the built-in digital effects
processor that is fed to the MONI bus and subse-
quently the MONITOR OUTPUT.
P
MASTER control
The MONI MASTER control determines the out-
put level of the MONITOR OUTPUT.
■
POWER Indicator, PHANTOM Switch & Indicator
Q
POWER indicator
The POWER indicator lights up when the
EMX620 is powered up ready for use.
R
PHANTOM switch
The PHANTOM switch is used to turn on and off
the +15 V phantom power for the Lo-Z
XLR-type inputs on input channels 1 through 4.
010
MASTER
EFFECT RTN
010
MONI
E
F
ON
OFF
PHANTOM
POWER
G
H