19MIDI Bulk Dump Transmission & Reception
Editing all 128 of the G50’s programs can involve a fair
amount of time and effort. The MIDI Bulk Dump feature
makes it possible to save single programs or all programs
to an external MIDI data recorder such as the Yamaha
MDF2 or a sequencer with MIDI data recorder capability.
Another use for this feature is to create different sets of
programs for different applications. You can create a
library of G50 programs to cover all your needs.
■ MIDI Bulk Dump Transmission
1. Press [MIDI] While Holding [PLAY]
To transmit the program data from the G50 to an external
device, first press the [MIDI] button while holding the
[PLAY] button. A small “b” will appear to the left of the
program number, and the entire display will flash.
■ MIDI Bulk Dump Reception
Program data can be reloaded from an external storage
device while the G50 is in the PLAY mode. The data is
loaded automatically when received from the external
storage device.
A single program will be loaded into the currently
selected G50 program number, replacing the previous
program. If all programs are received, all 128 of the
G50’s programs will be replaced.
“rEc” will appear on the G50 display during MIDI bulk
dump reception, then “don” will appear when the data has
been successfully received. If an error is encountered
during reception, “MErr” will appear on the display and
the receive operaytion will be aborted. The “don” or
“MErr” message will disappear when any mode button is
pressed.
PARAMETER MEMORY#/VALUE
–,
2. Specify a Program Number or “ALL”
Use the [-1] and [+1] buttons to select a single program to
transmit (“1” through “128”), or select “ALL” to transmit
all 128 programs.
3. Transmit the Data
Press the [▼] (“YES”) button to begin the actual bulk
dump transmission, or [▲] (“NO”) to cancel. If you start
the transmission, “Snd” will appear on the display while
the data is being transmitted, then “don” will appear
briefly when the transmission is done.
Edit Mode