10 PANEL CONTROLS AND TERMINALS
PANEL CONTROLS AND TERMINALS
LCD Display
Note: Other display indications are explained later in
the relevant sections of the manual.
3
14
24
ASSIGNABLE BLOCK AND PEDAL SWITCH FUNCTIONS
ABOUT THE ASSIGNABLE BLOCK LED INDICATORS
The following illustration shows how and under what conditions
the ASSIGNABLE block LEDs are lit.
ASSIGNABLE Block Controls
eASSIGNABLE Block Type Switch
• For selecting various control functions for the
ASSIGNABLE Block Pedal Switch and the
other Pedal Switches including effect program
selection, turning individual effect blocks (or
groups) on and off, MIN/MAX Volume, Auto
Volume, Backing Control and Chord Recall.
rASSIGNABLE Block Pedal Switch
• For performing various control functions,
including effect program selection, turning
individual effect blocks (or groups) on and off,
MIN/MAX Volume, Auto Volume, Backing
Control and Chord Recall. (The arrow mark
printed with the button name at the bottom left
indicates the direction in which the appropriate
buttons can be found.)
For more information on the ASSIGNABLE
Block Pedal Switch and the other Pedal
Switches, see the section “ASSIGNABLE
BLOCK AND PEDAL SWITCH FUNCTIONS”
on pages 10-14.
1INPUT PEAK indicator — for monitoring the input signal
level (lights continuously when level is too high).
2BANK/MEMORY indicator — displays the memory bank
and program numbers. When selecting songs, this briefly
displays the song number. In the Tuner function, this displays
the string number (when an open string is played) and/or the
name of the note played (for example, 6E).
3Sharp indicator — This flashes when a sharp note (for
example, G or C) is played in the tuner function.
46 — This cursor arrow points to a value in the display that can
currently be changed by using the [–]/[+] buttons.
When [MANUAL] or [MEMORY] are pressed (calling up
the Effect mode display), the arrow automatically disappears
from the display. You can use [6 CURSOR] to move the
cursor arrow back “in” the display. When [SONG/PAT-
TERN] is pressed (calling up the Backing mode display), the
cursor automatically appears in the display.
LED status
: Lit
: Flashing
: Off
Indicates bank/
program number
can be selected.
Indicates maximum
volume.
Indicates minimum
volume.
Indicates maximum
volume.
Indicates mute
or fade-in condition.
On
(active).
Off
(not active).
Off
(not active).
MEMORY ( BANK)/ x2 ON•OFF
MIN/MAX VOLUME
AUTO VOLUME ( MUTE
FADE IN)
BACKING CONTROL
CHORD RECALL
Note: The MEMORY LED
above will still be lit or flashing,
even if either of these is on.
When [MANUAL] is pressed
When [MEMORY] is pressed
When [SONG/PATTERN] is pressed
When [SHIFT] + [SONG REC]
are
p
ressed
On
(active).
Off
(not active).
Off
(not active).
the MEMORY LED here flashes,
and no other LED in this block is lit.
only the MEMORY LED here is lit or flashing.
only the BACKING CONTROL LED is lit.
only the CHORD RECALL LED is lit.
Indicates effect
(or effect group) can
be turned on/off.
Off
(not active).
Indicates Triggered
Run standby condition.
s