PANEL CONTROLS AND TERMINALS 11
PANEL CONTROLS AND TERMINALS
ABOUT THE PEDAL SWITCHES
The Pedal Switches have many different functions, depending on the ASSIGNABLE block settings
(indicated by the LEDs in the ASSIGNABLE block) and the selected mode. The following panel illus-
trations and explanations should help you in understanding how the Pedal Switches are used.
In the Manual, Memory* and Memory Edit modes:
When switching on/off individual effect blocks (or Groups) is enabled —
* Available in Memory mode only when ASSIGNABLE Block Pedal Switch has been pressed twice
quickly (enabling effect on/off control).
In the Memory mode:
When selection of effect bank number/program number is enabled —
Memory LED flashes.
Turns Compressor
(or selected Group)
on or off.
Turns Distortion
(or selected Group)
on or off.
Turns Equalizer
(or selected Group)
on or off.
Turns Chorus
(or selected Group)
on or off.
Turns Reverb/Delay
(or selected Group)
on or off. In Memory mode, pressing
once enables effect program
selection with Pedal Switches
1–5. For controlling MIN/MAX
VOLUME or AUTO VOLUME
(when either of those functions
have been selected with the
type switch).
Memory LED is lit continuously.
Selects effect program
number 1 (for the
current bank); with the
ASSIGNABLE Block
Pedal Switch, selects
bank 1 or 6.
Selects effect program
number 2 (for the
current bank); with the
ASSIGNABLE Block
Pedal Switch, selects
bank 2 or 7.
Selects effect program
number 3 (for the
current bank); with the
ASSIGNABLE Block
Pedal Switch, selects
bank 3 or 8.
Selects effect program
number 4 (for the
current bank); with the
ASSIGNABLE Block
Pedal Switch, selects
bank 4 or 9.
Selects effect program
number 5 (for the
current bank); with the
ASSIGNABLE Block
Pedal Switch, selects
bank 5 or 0.
Pressing this once and pressing another Pedal Switch selects banks 1 – 5.
Holding this and pressing another Pedal Switch selects banks 6 – 0.
Pressing twice quickly enables Pedal Switch control over on/off of individual effect or selected Group.
For controlling MIN/MAX VOLUME or AUTO VOLUME
(when either of those functions have been selected with the type switch).