HI-HAT STAND

HS650

OWNER'S MANUAL

Introduction

Thank you for purchasing a Yamaha Hi-Hat Stand. Please read this owner's manual thoroughly before use.

CAUTION

•To prevent the Hi-Hat Stand from coming loose during performance, tighten all securing bolts and adjustment bolts firmly.

•To maintain smooth action, apply some grease-grade oil (ex. lithium grease) to all of the moving parts as needed.

*Specifications and design are subject to change without notice.

qCymbal Support Plate

To install the bottom hi-hat cymbal, remove the hi-hat clutch assembly and place the cymbal on the felt washer on the cymbal support plate. The angle of the bottom cymbal can be adjusted by turning the angle bolt on the underside of the support plate.

To adjust the angle of the hi-hat cymbal, use the Knob Bolt located on the

underside of the cymbal support.

wHi-Hat Clutch

To install the top hi-hat cymbal, loosen the wing bolt and remove the entire hi-hat clutch assembly from the upper pull rod. Next, remove the clutch nut and position the cymbal between the two clutch felts.

After installation, tighten the clutch nut on to the clutch assembly to secure the cymbal. Place the entire assembly onto the hi hat upper pull rod and tighten the wing bolt to secure the desired position of the top cymbal.

The lock nuts on the top of the clutch can adjust the feel and sound of the hi hat cymbals. To obtain a loose sound, open the nuts off of the felt; for a tight sound, close the nuts onto the felt. Once the desired sound has been obtained, tighten firmly the lock nuts onto each other.

ePosition Clamp

Once the bottom hi-hat cymbal height has been decided, the position clamp can be used to mark the settings for future set ups and to prevent unintentional changes during musical performances. Use a drum key to firmly tighten the position clamp into place.

rFootboard Stabilizer Rod

The Footboard stabilizer rod should attach to holes in the frame at the bottom of the hi-hat base.

tSpur

The large heavy-duty rubber feet prevent unwanted movement of the hi-hat stand during playing conditions.

To minimize slippage further, there are two spurs in the frame. These spurs can be extended as needed by adjusting the turn screws provided on either side of the frame base.

Note:

To maintain smooth action, occasionally apply some grease-grade oil to all of the moving parts.

Be careful not to use excessive force when tightening the extender base nut as this may damage the nylon bushing inside the tube.

● Cymbal Support Plate

● Hi-Hat Clutch

 

Felt

Fiber

 

 

 

Clutch Bolt

Wing Bolt

 

 

 

 

 

Lock Nut

 

 

Felts

 

Cymbal

 

 

 

Support

Knob Bolt

 

Clutch Nut

Plate

 

 

 

 

Hi-Hat Shaft

Hi-Hat Clutch

Cymbal Support Plate

Knob Bolt

Position Clamp

Extender Base

Footboard

Spur Footboard Stabilizer Rod

Printed in Indonesia

Page 1
Image 1
Yamaha HS650 owner manual Introduction

HS650 specifications

The Yamaha HS650 is a versatile and compelling drum kit that brings together the essence of traditional acoustic playability with modern technological advancements. It's designed for drummers who demand the best from their instruments, whether in rehearsals, live performances, or studio recordings.

At the core of the HS650 is its precision-engineered hardware which includes a robust steel shell construction, ensuring durability and resonance. The shell is finished with high-quality paint that both enhances its aesthetic appeal and protects it from wear and tear. The kit features an impressive set of toms, snare, bass drum, and cymbals, each crafted to deliver an authentic drumming experience.

One of the key features of the HS650 is its advanced electronic trigger system. This technology allows the drum kit to translate the nuances of an acoustic performance into a digital format, offering drummers an array of sounds and effects. The electronic triggers are highly responsive, ensuring that every hit is captured with utmost accuracy. This responsiveness is further complemented by a sophisticated sound engine that includes a wide selection of drum kits, percussion sounds, and effects, allowing drummers to easily switch between genres and styles.

The HS650 also boasts an intuitive user interface, making it easy to navigate through the various settings and options. The control panel is designed to be user-friendly, allowing both beginners and seasoned drummers to quickly adapt and find their preferred sound profiles.

In addition to its sound capabilities, the HS650 is built for comfort and playability. The adjustable hardware can be tailored to suit each drummer's physical needs, providing an ergonomic playing experience. High-quality drum pads mimic the feel of traditional drums, offering both sensitivity and durability for intense practice sessions or performances.

Connectivity is another standout feature of the HS650. It includes USB and MIDI outputs, enabling seamless integration with recording software and other electronic music equipment. This allows for straightforward mixing and recording, making it an ideal choice for musicians who wish to create professional-quality tracks from home.

In summary, the Yamaha HS650 embodies innovation and craftsmanship. Its harmonious blend of traditional drumming elements and modern technology makes it a powerful tool for any drummer, regardless of skill level. With robust construction, responsive triggering, a wide array of sounds, user-friendly controls, and excellent connectivity, the Yamaha HS650 is a standout choice in the realm of electronic drum kits.
Top Page Image Contents