■Virtual CINEMA DSP and SILENT CINEMA
Virtual CINEMA DSP
Virtual CINEMA DSP allows you to enjoy the sound field effects of the DSP program without rear speakers. Using YAMAHA original technology, natural surround reproduction is possible through the generation of a virtual speaker.
The sound field processing is changed to the Virtual CINEMA DSP mode by setting “REAR LR SP” on the SET MENU to NON. Virtual CINEMA DSP is performed by using the main speakers.
Note
•This unit is not set in the Virtual CINEMA DSP mode even if “REAR LR SP” is set to NON in the following cases:
–when the 5CH STEREO, PRO LOGIC/NORMAL, DOLBY DIGITAL/NORMAL or DTS/NORMAL program is selected;
–when the sound effect is turned off;
–when 6CH INPUT is selected as the input source;
–when the Dolby Digital KARAOKE source is played;
–when using the test tone; or
–when connecting the headphones (you will hear SILENT CINEMA).
SILENT CINEMA
SILENT CINEMA allows you to enjoy the realistic feel of the DSP program while using headphones. This feature delivers powerful surround reproduction just as if listening through the speakers.
You can listen to SILENT CINEMA by connecting your headphones to the PHONES jack while the effect speakers are on.
PLAYING A SOURCE
Canceling the Sound Effect (turning
off the effect speakers)
Press EFFECT to cancel the sound effect and monitor only the main sound.
Press EFFECT again to turn the sound effect back on.
EFFECT
or
Front panel | Remote control |
Notes
• If the sound effect is canceled when Dolby Digital or DTS is decoding, the sounds of the center and rear channels are mixed and output from the main speakers.
• If you turn off the sound effect when Dolby Digital or DTS is decoding, it may happen that the sound is output faintly or not output normally, depending on the source. In that case, turn back
on the sound effect. BASICOPERATION
English
25