Adjusting Method

Adjustments should be performed with the remote control while watching the information on the display.

1

2

1 Press TIME/LEVEL repeatedly to select the item you want to adjust.

Each time you press TIME/LEVEL, the selected item changes and appears on the display as below.

DELAY TIME AND SPEAKER OUTPUT LEVELS

Notes

•If “CENTER SP” or “REAR LR SP” is set to NON, or “BASS OUT”is set to MAIN, the output level of that speaker cannot be adjusted.

•When you adjust the output level with TIME/LEVEL, the settings you made with the test tone will be changed.

•To adjust speakers other than the subwoofer, the adjusting procedure using test tones on page 19 is recommended.

Memory back-up

The memory back-up circuit prevents the stored data from being lost when this unit is set in the standby mode. If, however, the power cord is disconnected from the AC power outlet or the power is cut for more than one week, the latest values for the delay time and the center/rear/ subwoofer output levels that were set will automatically return to the preset values. If so, adjust the delay time and output levels again.

 

 

D E L A Y

Delay time

 

 

 

 

 

 

Center speaker output level

 

 

 

 

 

 

C E N T E R

 

 

 

 

Right rear speaker output level

 

 

 

 

 

 

R S U R .

 

 

 

 

Left rear speaker output level

 

 

 

 

 

 

L S U R .

 

 

 

 

Subwoofer output level

 

 

 

 

 

 

S W F R

 

 

Note

•Depending on the setting of the SET MENU, you may not be able to select all these items.

2 Press – or + to adjust the delay time or speaker output levels.

3 Repeat steps 1 and 2 to adjust the settings of any other item.

ADVANCEDOPERA TION

English

41