SET MENU
4 Press – or + repeatedly to change the setting of the item.
5 Press PRG– (or PRG+) repeatedly until the input source name appears to exit from the SET MENU.
Memory
The memory
1SPEAKER SET (speaker mode settings)
Use this feature to select suitable output modes for your speaker configuration.
Note
•When 6CH INPUT is selected as the input source, level adjustments in items of “1 SPEAKER SET” are not affected (except “MAIN LVL”).
By adding a center speaker to your speaker configuration, the unit can provide good dialog localization for many listeners and superior synchronization of sound and images.
Choices: LRG (large), SML (small), NON (none)
Initial setting: LRG
LRG
Select this if you have a large center speaker. The entire range of the center channel signal is directed to the center speaker.
SML
Select this if you have a small center speaker. The low- frequency signals (90 Hz and below) of the center channel are directed to the speakers selected with “BASS OUT”.
NON
Select this if you do not have a center speaker. All of the center channel signals are directed to the left and right main speakers.
■MAIN SP (main speaker mode)Choices: LARGE, SMALL
Initial setting: LARGE
LARGE
Select this if you have large main speakers. The entire range of the left and right main channel signal is directed to the left and right main speakers.
SMALL
Select this if you have small main speakers. The low- frequency signals (90 Hz and below) of the main channel are directed to the speakers selected with “BASS OUT”.
Note
•When you select MAIN for “BASS OUT”, the
36