9PARAM. INI (parameter initialization)

Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group, all of the parameter values within that group revert to their initial settings.

Press the corresponding numeric button for the DSP program that you want to initialize.

The asterisk (*) next to the program number means that the parameter values have been changed.

SET MENU

2 Press j / i to adjust the LFE level.

10 LFE LEVEL

≥S P E A K E R … … … … - 1 1 d B H E A D P H O N E … … … … 0 d B

Note

•Adjust the LFE level according to the capacity of your subwoofer or headphones.

9 PARAM. INI

1 2 3 * 4

*5 6 7 8

9 * 1 0

P r e s s N o . K e y

Notes

•You cannot initialize the individual DSP programs within a group separately.

•The parameter values of the DSP programs do not change if you initialize a program group that does not have the asterisk mark (*).

•When “14 MEMORY GUARD” is set to ON (see page 65), you cannot initialize any program groups.

•Once you initialize a DSP program group, you cannot automatically revert to the previous parameter settings.

10 LFE LEVEL

This setting is effective only when this unit decodes Dolby Digital or DTS signals.

Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a Dolby Digital or DTS signal. The LFE signal carries the low-frequency special effect sound which is only added to certain scenes.

Control range (dB): –20 to 0 for both SPEAKER and

HEADPHONE

Initial setting: 0 dB for both SPEAKER and

HEADPHONE

1 Press d/uto select the item to be adjusted.

10 LFE LEVEL

≥S P E A K E R … … … … … … 0 d B H E A D P H O N E … … … … 0 d B

11 D-RANGE (dynamic range)

Use this feature to adjust the dynamic range. This setting is effective only when this unit decodes Dolby Digital signals.

11 D-RANGE

≥S P :M A X S T D M I N

H P :M A X S T D M I N

Choices: MAX, STD, MIN

Initial setting: MAX (for both speakers and headphones)

MAX

Select the “MAX” setting for feature films.

STD

Select the “STD” (Standard) setting for general use.

MIN

Select the “MIN” setting for listening to sources at extremely low volume levels.

OPERATION

ADVANCED

 

 

English

63