Yamaha HTR-5590 ZONE, ZONE 2 (For U.S.A., Canada and Australia models), ■Example of a system configuration and connections

ZONE 2 (For U.S.A., Canada and Australia models)

You can make up a multi-room audio system with this unit. You can enjoy an audio source selected with INPUT l/ h (or input selector buttons) in the second room (Zone 2).

Only analog signals are sent to the second room. For any source you want to listen to in the second room, you must connect the analog output jack from the source to the corresponding analog input jack on this unit.

To use the multi-room functions of this unit, you need the following additional equipment:

•An infrared signal receiver in the second room

•An infrared emitter in the main room

This emitter transmits the infrared signals from the remote control in the second room to the main room (for example, to a CD player or LD player).

•An amplifier and speakers for the second room

OUT	IN	OUT	IN		REMOTE
				CONTROL OUT

This unit

y

•Since there are so many ways to connect and use this unit in a multi-room installation, we recommend that you consult with the nearest authorized YAMAHA dealer or service center for the Zone 2 connections which will best meet your requirements.

•Some YAMAHA models are able to connect directly to the REMOTE CONTROL OUT jack of this unit. If you own these products, you may not need to use an infrared emitter. Up to 6 YAMAHA components can be connected as shown.

■Example of a system configuration and connections

Main room		ZONE 2 AUDIO OUT
		Second room
		Amplifier
CD player		Infrared signal
(or other component)	This unit
		receiver
CD INPUT
		Remote control
REMOTE CONTROL OUT
Infrared emitter
REMOTE CONTROL OUT		REMOTE CONTROL IN

Notes

•When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2 volume with the control on the amplifier in the second room.

•DO NOT USE the Zone 2 feature for CDs encoded with DTS to avoid unexpected noise.

68