REMOTE CONTROL FEATURES

Switching library codes <Except for HTR-5840: U.K. and Europe models>

You can select the unit you want to operate with the remote control by entering the library code.

1Press CODE SET using a ballpoint pen or similar object.

The TRANSMIT indicator on the remote control flashes twice.

TRANSMIT

CODE SET

Clearing set up remote control codes

1Press an input selector button or / to select the component control for which you want to clear the remote control code.

CD MD/CD-R TUNER SLEEP

DVD

DTV/CBL

V-AUX

MULTI CH IN

VCR

 

 

AMP

2Enter the code number “9991” or “9992” (see the table below).

The TRANSMIT indicator on the remote control flashes twice, and the library code is changed.

AMP library

 

Remote

code

 

 

control ID

(remote

Function

(unit setting:

control

 

 

see page 64)

setting)

 

 

 

 

 

 

9991

To operate this unit using

ID1

the default code.

(initial setting)

 

 

 

 

9992

To operate this unit using

ID2

an alternative code.

 

 

 

 

 

When using multiple YAMAHA receivers/amplifiers, you may be able to operate the other components simultaneously with the default code setting. In this case, set one of the alternative codes to operate this unit separately.

Note

You must also make settings for the receiver/amplifier.

2Press CODE SET using a ballpoint pen or similar object.

The TRANSMIT indicator on the remote control flashes twice.

TRANSMIT

CODE SET

3Enter the code number “0000”.

The TRANSMIT indicator on the remote control flashes twice, and the remote control code for the selected component is cleared.

y

•If you do not press any button within 30 seconds after step 2, the clearing process is canceled. If this happens, start over from step 1.

•You can clear all setup remote control codes at once by entering the code number “9990”.

68