Yamaha HTR-6090, RX-V1700 owner manual Master

Step 3. Insert the Firmware Update CD (Audio CD) into the CD/DVD Player and close the tray. If the disc begins to play, press the STOP botton on the CD/DVD Player.

3a) If a DVD Player is being used to perform this update, make sure that the DVD Player is set to PCM Digital Bitstream. See the DVD Player Owner’s Manual for instructions on how to configure the PCM Digital Bitstream. Once update is complete, restore DVD Player to its original settings.

AC IN

Step 4. Unplug the AC power cable from the back of the Yamaha receiver, as shown in FIG 2.0.

AC OUTLETS

To the AC wall outlet

Fig 2.0

Step 5. On the front panel of the Yamaha receiver, push the MASTER button to the “ON” position, as shown in FIG 3.0. You can find operational details in the owner’s manual.

ON

OFF

MASTER

AUDIO	TONE
SELECT	CONTROL	A/B/C/D/E	PRESET/TUN
INPUT		CATEGORY
MAIN ZONE		STRAIGHT
		EFFECT
ON/OFF		YPAO	SILENT CINEMA
	PROGRAM	OPTIMIZER
		MIC	PHONES

ON

OFF

MASTER

Fig 3.0

Step 6. Press and hold the MAIN ZONE ON/OFF button and keep it pressed, as shown in FIG 4.0 while you plug the AC power cord back into the Yamaha receiver, as shown in FIG 4.1. Once the front panel displays “CDDA UPGRADER” you can let go of the MAIN ZONE ON/OFF button.

AUDIO

SELECT

INPUT

MAIN ZONE

ON/OFF

PR

ON

OFF

MASTER

Fig 4.0

AC IN

To the AC wall outlet

AC OUTLETS

Fig 4.1