Yamaha HTR-6160

24 En

Connections

■Connecting an external amplifier

This unit has more than enough power for any home use. However, if you want to add more power to the speaker output

or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks. Each PRE OUT jack outputs

the same channel signals as the corresponding SPEAKERS terminals.

• When you make connections to the PRE OUT jacks, do not make connections to the SPEAKERS terminals.

• The signals output at the FRONT PRE OUT jacks are affected by the TONE CONTROL settings (see page 52).

• Adjust the volume level of the subwoofer with the control on the subwoofer (see page 52).

• Some signals may not be output at the SUBWOOFER PRE OUT jacks depending on the settings for “SPEAKER SET” (see page 85).

1FRONT PRE OUT jacks

Front channel output jacks.

2SURROUND PRE OUT jacks

Surround channel output jacks.

3SUR.BACK PRE OUT jacks

Surround back channel output jacks. When you only

connect one external amplifier for the surround back

channel, connect it to the SINGLE jack.

• When “BI-AMP” is set to “ON”, this unit outputs the front

channel audio signals at the SUR.BACK PRE OUT jacks.

• The audio signals output at the SUR.BACK PRE OUT jacks

differ depending on the “EXTRA SP ASSIGN” setting (see

pages 33 and 85).

4SUBWOOFER PRE OUT jacks

Connect one or two subwoofers with a built-in amplifier.

The signal output at the SUBWOOFER PRE OUT 2 is the same

as the one output at the SUBWOOFER PRE OUT 1 jack.

5CENTER PRE OUT jack

Center channel output jack.

Notes

Note

PRE OUT

SUBWOOFERFRONT

SUR. BACKSURROUND

SINGLE CENTER

1234