Yamaha HTR-6160

26 En

Connections

■Using REMOTE IN/OUT jacks

When the components are the Yamaha products and have

the capability of the transmission of the remote control

signals, connect the REMOTE IN jack and REMOTE

OUT jack to the remote control input and output jack with

the monaural analog mini cable as follows.

• If the components have the capability of the SCENE control

signals, this unit can automatically activate the corresponding

components and start the playback when you use one of the

SCENE buttons. Refer to the owner’s manuals for details about

the capability of the SCENE control signals of the components.

• If the component connected to the REMOTE OUT jack is not

the Yamaha product, set “SCENE IR” in the advanced setup

menu to “OFF” (see page 109).

Use the VIDEO AUX jacks on the front panel to connect a

game console or a video camera to this unit.

• The audio signals input at the DOCK terminal on the rear panel

take priority over the ones input at the VIDEO AUX jacks.

• To reproduce the source signals input at these jacks, select

“V-AUX” as the input source.

REMOTE TRIGGER

OUT

+12V

15mA MAX.

IN OUT

UNBAL.

75Ω

Yamaha component

(CD or DVD player,

etc.)

Remote

control in

Remote

control out

Infrared signal

receiver or Yamaha

component

Using the VIDEO AUX jacks on the

front panel

Caution

Be sure to turn down the volume of this unit and other

components before making connections.

Notes

VOLUME

SILENT CINEMA

PHONES

TONE CONTROL STRAIGHT PURE DIRECT

SCENE

AUDIO SELECT OPTIMIZER MIC

EFFECT

PROGRAM INPUT

STANDBY

/ON

SYSTEM OFF

PRESET/TUNING/CHBANDSPEAKERS MEMORY INFO ON/OFF

ZONE 2

CONTROL

ZONE 2