OPERATIONS

Playback

You can use any type of tape, since the unit automatically detects the tape type.

Tape Tray

DOLBY NR

&

#

NATURAL SOUND STEREO CASSETTE DECK KX-E100

 

 

 

DOLBY B-C NR

 

 

COUNTER

DOLBY NR

 

 

RESET

 

 

 

STANDBY/ON

REC LEVEL

DIRECTION

MODE

REC/

 

 

PAUSE

 

 

 

MIN

MAX

 

STANDBY/ MODE

! / ⁄ DIRECTION

ON

 

 

 

1Press STANDBY/ON to turn on this unit and also RX-E100.

2Set RX-E100 to cassette deck function mode.

3Press to open the tape tray and place a recorded tape on the tray.

4Press to close the tape tray.

5Press MODE to select the reverse mode.

Each time you press MODE, the reverse mode changes and the corresponding mode indicator lights up as follows:

: One side of the tape is played back.

: Both sides of the tape are played back.

: Both sides of the tape are played back up to 8 times continuously.

6Press DIRECTION to change the direction of the tape.

•If you place the tape on the tray with side A upward, #indicates playing side A and @ indicates playing side B.

7Select the noise reduction type using DOLBY NR if necessary.

8Press #to start play.

To stop play

Press &.

To eject a tape

Press to open the tape tray and remove the tape from the tray.

To adjust the volume level

Use the volume control of RX-E100.

To fast-forward or rewind the tape

Press ⁄or !to fast-forward or rewind the tape during stop mode.

To search for the beginning of a selection

Press ⁄or !to search for the beginning of the next or current selection during play mode.

Notes

•The blank interval between selections must be at least 4 seconds long.

•The search function may not operate properly with tapes recorded at a low recording level or which have excessive noise.

•When you play the beginning part or end part of the tape, the search function may not work correctly.

E-6