Recording

COUNTER RESET

DOLBY NR

DIRECTION

NATURAL SOUND STEREO CASSETTE DECK KX-E100

 

 

DOLBY B-C NR

 

COUNTER

DOLBY NR

 

RESET

 

STANDBY/ON

 

REC LEVEL DIRECTION

MODE

REC/

 

PAUSE

 

 

 

MIN MAX

MODE

REC/PAUSE

REC LEVEL

1Set the recording mode of RX-E100 and other components.

2Press MODE to select the reverse mode.

Each time you press MODE, the reverse mode changes and the corresponding mode indicator lights up as follows:

: One side of the tape is recorded.

: Both sides of the tape are recorded.

3Press DIRECTION to change the direction of the tape.

•If you place the tape on the tray with side A upward, #indicates recording side A and @ indicates recording side B.

4Press REC/PAUSE.

The unit turns into standby mode for recording and the REC indicator flashes.

5Adjust the recording level by turning REC LEVEL. For the best results, play the loudest passage of the source to be recorded and watch the recording level meter in the display. Adjust REC LEVEL so that the highest peak causes the +2 dB level indicators to flicker.

When recording a CD, use Peak Level Search on CDX-E100 for the optimum adjustment.

6Select the noise reduction type using DOLBY NR if necessary.

7Press #.

OPERATIONS

8Start playing the source component.

•Synchronized start is possible if you have connected the CD player, CDX-E100 or MD recorder, MDX-E100 to this unit. Press ^on MDX-E100 or CDX-E100 after step 6. Recording begins automatically.

To pause recording

Press REC/PAUSE.

To resume recording, press #.

To stop recording

Press &.

Note

•When you record on @direction of the tape, the unit stops recording after recording the side of the tape regardless of the reverse mode setting in step 2.

The tape counter

The tape counter is useful for searching and locating a certain point on the tape. Pressing COUNTER RESET will reset the tape counter to “0000”.

English

E-7