Operation
engine, and propeller. Correct trim is also affected by variables such as the load in the boat, sea conditions, and running speed.
EWM00740
WARNING
Excessive trim for the operating conditions (either trim up or trim down) can cause boat instability and can make steering the boat more difficult. This increases the possibility of an accident. If the boat begins to feel unstable or is hard to steer, slow down and/or readjust the trim angle.
1
ZMU04258
1. Trim operating angle
EMU27881
Adjusting trim angle
Power trim and tilt models
EWM00750
WARNING
●Be sure all people are clear of the out- board motor when adjusting the tilt an- gle, also be careful not to pinch any body parts between the drive unit and clamp bracket.
●Use caution when trying a trim position for the first time. Increase speed gradu- ally and watch for any signs of instability or control problems. Improper trim an- gle can cause loss of control.
●Use the power tilt switch located on the bottom engine cowling (if equipped) only when the boat is at a complete stop with the engine off.
Adjust the outboard motor trim angle using the power trim and tilt switch.
1. Power trim and tilt switch
30