RUNNING H/F 1

8

To enjoy the tuner on this unit, you need to connect AM, FM and DAB antennas to this unit. This product includes an
AM loop antenna, Indoor FM antenna and Indoor DAB antenna. If there is a problem of weak radio wave reception in
your area or you want to improve radio reception, we recommend that you use commercially available outdoor antennas.
For details, consult the nearest authorized YAMAHA dealer or service center.
The AM loop Antenna should be placed away from this unit.
1Attach the antenna stand to the AM loop
antenna.
When attaching the antenna to the wall, you do not
need to use the antenna stand.
2Press and hold the tab.
3Insert the AM loop antenna lead wires into
the AM ANT terminal. Then release the tab.
4Repeat steps 2 to 3 to insert the AM loop
antenna lead wires into the GND terminal.
5Extend the cord and place the AM loop
antenna away from this unit and speaker
cables.
While listening to the radio, rotate the antenna head
to find the best angle for reception.
1Connect the supplied indoor FM antenna to
the FM ANT jack on this unit.
2Place the antenna away from this unit and
speaker cables.
It is recommended to use an outdoor FM Antenna in weak
FM signal areas. In this case, disconnect the indoor FM
antenna.

CONNECTING ANTENNAS

Note

AM loop Antenna

OUTIN OUT
IN
AM ANTGND
DAB ANT
OPTICAL
OUT
SUBWOOFER TAPE
AUX 1
TUNER
DIGITAL
OUT
IN
AUX 2
Indoor FM
antenna
(supplied)
AM loop
antenna
(supplied)
Ground
(GND terminal)

Indoor FM Antenna

00EN_00_CRX-M170_G.book Page 8 Wednesday, July 27, 2005 6:11 PM