6
Copying Patches You Like From the Library File
Steps 1 to 3 are identical to those found in the “Using the Library Files (Patches) found in the CD-
ROM” on page 4.
4
Click on the “Import” button in the toolbar to display the “Import” dialog box.
5
Click “OpenFile” and select and open the library file you want to work with. The contents of
the library file are displayed in the import dialog box (page 19).
6
Check the “Monitor” box in the “Import” dialog box. If you check this box, data for the
patch you select (click on) is sent to the MAGICSTOMP for monitoring. Try out the patch
with your guitar connected to the MAGICSTOMP (page 19).
7
Clicking on the patch you want to store sends its patch data to the MAGICSTOMP.
Press the [STORE] button on the MAGICSTOMP to enter the Store Standby mode, then
use the – and + switches on the MAGICSTOMP to select the destination to which the
patch will be stored.
Import Button
U01¤SciFiFlange
PRESS[STORE]2sec
U11¤SciFiFlange
PRESS[STORE]2sec
Store Standby
Destination patch number for storing