TROUBLESHOOTING

Problem

Cause

Remedy

page

No sound.

The power of the unit is off.

Connect the power cable correctly.

 

 

 

 

 

The iPod software version has not been

Download the latest iTunes software to update the

 

updated.

iPod software version to the latest.

 

 

 

 

 

 

The iPod is in the process of connecting

Please wait for a while.

 

with the unit.

 

 

 

 

 

 

 

MCR-140: The battery of the iPod is low.

Charge the iPod.

 

 

 

 

 

MCR-140: The iPod is not connected to

Connect the iPod firmly.

 

the transmitter firmly.

 

 

 

 

 

 

 

MCR-140: Earphones are connected to

Remove the earphones.

 

the iPod.

 

 

 

 

 

 

 

MCR-140: The signal from the

Change the way of holding, the orientation, or the

 

transmitter is blocked by your body or

position of the transmitter to avoid your body or

 

 

metallic objects, etc.

metallic objects blocking the signal.

 

 

 

 

 

 

MCR-140: There is a device (microwave

Place the unit away from these devices, or turn them

 

oven, wireless LAN, cordless telephone,

off. If the device is IEEE802.11n-compliant, change

 

 

etc.) outputting signals in the 2.4 GHz

the channel setting of the device so as not to affect

 

 

frequency band nearby.

the unit.

 

 

 

 

 

 

MCR-140: Distance is too far.

Move the transmitter closer to the unit. Transmission

 

 

range is approximately 10 m (32.8 ft). Also, placing

 

 

 

the unit in a lower position makes it easier to receive

 

 

 

wireless signals.

 

 

 

 

 

 

MCR-140: The unit and transmitter are

Set both the unit and transmitter to the same group.

5

 

not connected since they are set to

 

 

 

different groups.

 

 

 

 

 

 

 

MCR-140: The unit is connected to

Select a different group by changing the group

5

 

another unit.

setting of the unit and transmitter.

 

 

 

 

 

No sound.

MCR-040: The iPod is set in the iPod

Remove the iPod from the unit, then set it in the iPod

5

 

dock improperly.

dock again.

 

The iPod sounds, but

 

 

 

MCR-140: The iPod is not connected to

Remove the iPod from the transmitter, then set it to

5

you cannot operate it

the transmitter properly.

the transmitter again.

 

with the unit or the

 

 

 

 

remote control.

 

 

 

 

 

 

 

Cannot change the

The iPod is not supported by this unit.

Only iPod (5th generation), iPod classic, iPod nano,

5

volume by changing

 

and iPod touch are supported.

 

the volume of the

 

 

 

The iPod is not connected correctly.

Connect the iPod firmly.

iPod.

 

 

 

The iPod display

The iPod software version is out of date.

Update the iPod software version to the latest. If the

 

problem cannot be solved, even with the latest

 

does not change by

 

software, reset the iPod.

 

pressing the remote

 

 

 

control volume keys.

 

 

 

The unit cannot be

 

 

 

operated by the

 

 

 

remote control.

 

 

 

 

 

 

 

You cannot operate

MCR-040: The iPod is set in the iPod

Remove the iPod from the unit, then set it in the iPod

5

from the iPod.

dock improperly.

dock again.

 

 

 

 

 

 

MCR-140: The iPod is connected to the

Remove the iPod from the transmitter, and connect

8

 

transmitter improperly.

to the transmitter again, then start playback.

 

 

 

 

 

The playback

The iPod you set is not compatible with

Only iPod (5th generation), iPod classic, iPod nano,

5

information is not

the playback information display.

and iPod touch are supported.

 

displayed on the

 

 

 

You are using MCR-140.

Only MCR-040 is available for playback information

front panel display.

 

display.

 

 

 

 

 

 

 

 

The iPod does not

MCR-040: The iPod is set in the iPod

Remove the iPod from the unit, then set it in the iPod

5

charge up.

dock improperly.

dock again.

 

 

 

 

 

 

MCR-140: The iPod is set in the charging

Remove the iPod from the unit, then set it in the

5

 

cradle improperly.

charging cradle again.

 

 

 

 

 

INFORMATION

ADDITIONAL

 

 

English

17 En