Yamaha MCR-040/140 CONNECTION, Basic connection, 4 En, Notes, Notes, CAUTION

CONNECTION

Basic connection

Follow the procedure below to connect the speakers and indoor FM antenna to this unit.

CAUTION

Do not connect the power cable of this unit until all cable connections are completed.

Indoor FM antenna

		Notes
	To the wall outlet	• The antenna should be stretched out.
	To the wall outlet	• If radio reception is poor, change the height,
		• If radio reception is poor, change the height,
		direction, or placement of the antenna.
		• If you use an outdoor antenna instead of the
		supplied FM antenna, reception will be better.

Notes

•Be sure to connect the left channel (L), right channel (R), “+”(red) “–”(black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lacks bass.

•Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and/ or the speakers.

•Use the supplied speakers only. Using different speakers may cause the sound to differ from the intended design.

•There is a chance that placing speakers too close to a CRT-based (Braun tube) TV set might impair picture color. Should this happen, move the speakers away from the TV set.