13 En
LISTENING TO DAB STATIONS
English Français Deutsch Svenska Italiano Español Nederlands Русский
If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth connection will be
disconnected.
• Hold down on the remote control or SOURCE on this unit.
• Turn the system off.
•Turn off the Bluetooth setting of the other component.
When you connect an iPod touch/iPhone/iPad via Bluetooth, the Bluetooth connection may be disconnected if you switch the aud io source to
iPod or USB while an iPod/iPhone/iPad is connected.
DAB (Digital Audio Broadcasting) and DAB+ use digital signals for clearer sound and more stable reception compared to
analog signals.
DAB+ is based on the original DAB standard but uses a more efficient audio codec.
DAB and DAB+ are broadcast in blocks of data called “ensembles” containing up to several radio stations that are
simultaneously broadcast.
DAB and DAB+ can also include an extensive amount of text information, enabling you to select a station by name.
Other information, such as the ensemble name or the status of the digital signal, can be displayed on the front panel display.
“DAB” described in this manual may also refer to “DAB+”.
Before tuning into DAB stations, an initial scan must be performed. When you select the DAB for the first time, the initial
scan is performed automatically.
To li st en to a DA B s tat io n, co nne ct th e ant enn a as de scribed in “Connecting the speakers and antenna” (P. 2).
Performin g the in itial sca n again ( Option m enu)

Disconnecting a Bluetooth connection

LISTENING TO DAB STATIONS

Preparing for DAB reception

Press the RADIO source button to switch the
audio source to DAB.
The initial scan starts. During the scan, the degree of
progress is displayed on the front panel display.
When scan is completed, the number of receivable DAB
stations appear on the front panel display.
If the initial scan is performed, stored DAB station information
and preset DAB stations are cleared.
1Press OPTION.
The option menu will appear.
2Press / to select DAB INIT SCAN, and
then press ENTER.
The display will indicate “Press ENTER”.
3Press ENTER.
The initial scan starts.
3
2
1